金蜘蛛紧固件网黄页

　热点信息
　

　我要参展 | 我要参观　

•金蜘蛛展8月8日同时亮相《深圳晶报》《温州商报》《新民晚报》

•金蜘蛛展步入《商界》　覆盖华人商业圈

•金蜘蛛展在嘉兴日报上精彩上演

•金蜘蛛展亮相广州日报　邀请珠三角紧固件用户

•金蜘蛛展热潮在海外不断升温

•2008中国紧固件产业升级的元年与金蜘蛛展

•中国紧固件产业的标志展会

•2008广州紧固件交易展|金蜘蛛展参展商语录

已登记参观的部分国外采购商

已登记参观的部分国内采购商

金蜘蛛紧固件黄页
共有25个大类 1277个分类　

热门分类


六角头螺栓　GB/T 5782-2000	十字槽盘头自攻螺钉　GB845-85
内六角平圆头螺钉　GB/T 70.2-2000	内六角圆柱头螺钉　GB/T 70.1-2000
六角头螺栓全螺纹　GB/T 5783-2000	六角厚螺母　GB56-88
蝶形螺母　GB62-88	六角薄螺母　GB/T 6172.1-2000
十字槽盘头螺钉　GB/T 818-2000	圆螺母　GB812-88
螺杆　GB/T 15389-94	六角螺母 C级　GB/T41-2000
六角头自攻螺钉　GB5285-85	方螺母 C级　GB39-88
十字槽沉头自攻螺钉　GB846-85	内六角沉头螺钉　GB/T 70.3-2000
标准型弹簧垫圈　GB93-87	六角法兰面螺母　GB/T 6177.1-2000
半圆头方颈螺栓　GB12-88	方头螺栓 C级　GB8-88
六角法兰面螺栓-加大系列-B级　GB5789-86	十字槽半沉头自攻螺钉　GB847-85
沉头方颈螺栓　GB10-88	十字槽盘头自钻自攻螺钉　GB/T 15856.1-2002
地脚螺栓　GB799-88	六角法兰面螺栓小系列　GB/T 16674-1996
开槽沉头螺钉　GB/T 68-2000	内六角凹端紧定螺钉　GB/T 80-2000
六角头螺栓 C级　GB/T 5780-2000	活节螺栓　GB798-88

分类目录

螺栓

－－方头螺栓 C级　UDC 621.882.6 | GB 8-88 | 代替 GB8-76
Square head bolts-Product grade C

－－沉头方颈螺栓　UDC 621.882.6 | GB 10-88 | 代替 GB10-76
Flat countersunk square neck bolts

－－沉头带榫螺拴　UDC 621.882.6 | GB 11-88 | 代替 GB11-76
Flat countersunk nib bolts

－－半圆头方颈螺栓　UDC 621.882.6 | GB 12-88 | 代替 GB12-76
Cup head square neck bolts

－－半圆头带榫螺栓　UDC 621.882.6 | GB 13-88 | 代替 GB13-76
Cup head nid bolts

－－大半圆头方颈螺栓 C级　ISO 8677:1986 | GB 14-1998 | 代替 GB14-88
Cup head square neck bolts with large head-Product grade C

－－大半圆头带榫螺栓　UDC 621.882.6 | GB 15-88 | 代替 GB15-76
Cup head nib bolts with large head

－－六角头铰制孔用螺栓　UDC 621.882.6 | GB 27-88 | 代替 GB27-76
Hexagon fit bolts-product grade A and B

－－六角头螺杆带孔铰制孔用螺栓　UDC 621.882.6 | GB 28-88 | 代替 GB28-76
Hexagon fit bolts with split pin hole on shank-product grade A and B

－－六角头头部带槽螺栓 A 和 B 级　UDC 621.882.6 | GB 29.1-88 | 代替 GB29-76
Hexagon bolts with slot on head -product A and B

－－十字槽凹穴六角头螺栓　UDC 621.882.6 | GB 29.2-88 | 代替 GB29-76
Cross recessed hexagon bolts with indentation

－－六角头螺杆带孔螺栓　UDC 621.882.6 | GB 31.1-88 | 代替 GB31、23、24-76
Hexagon bolts with split pin hole on shank-product grade A and B

－－六角头螺杆带孔螺栓细杆 B级　UDC 621.882.6 | GB 31.2-88 | 代替 GB31、23、24-76
Hexagon bolts with split pin hole on shank-Reduced shank-product grade B

－－六角头螺杆带孔螺栓细牙 A和B级　UDC 621.882.6 | GB 31.3-88 | 代替 GB31、23、24-76
Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B

－－六角头头部带孔螺栓 A 和 B级　UDC 621.882.6 | GB 32.1-88 | 代替 GB32、25、26-76
Hexagon bolts with wire holes on head-product grade A and B

－－六角头头部带孔螺栓细杆 B级　UDC 621.882.6 | GB 32.2-88 | 代替 GB32、25、26-76
Hexagon bolts with wire holes on head-Reduced shank-product grade B

－－六角头头部带孔螺栓细牙 A 和 B 级　UDC 621.882.6 | GB 32.3-88 | 代替 GB32、25、26-76
Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B

－－下方头螺栓 B级　UDC 621.882.6 | GB 35-88 | 代替 GB35-76
Square head bolts with small head-praduct grade B

－－T 形槽用螺栓　UDC 621.882.6 | GB 37-88 | 代替 GB37-76
Bolts for T-Slot

－－加强半圆头方颈螺栓　GB /T794-93 | 代替 GB794-67
Strengthened cup head square neck bolts

－－活节螺栓　UDC 621.882.6 | GB 798-88 | 代替 GB798-76
Eye bolts

－－地脚螺栓　UDC 621.882.6 | GB 799-88 | 代替 GB799-76
Eyelet bolts

－－沉头双榫螺　UDC 621.882.6 | GB 800-88 | 代替 GB800-77
Flat countersunk double nib bolts

－－小半圆头低方颈螺栓 B级　ISO 8678:1988 | GB /T 801-1998 | 代替 GB801-88
Cup head square neck bolts with small head and short neck-product grade B

－－六角头螺栓 C级　ISO 4016:1999 | GB /T 5780-2000 | 代替 GB/T 5780-1986
Hexagon head bolts-product grade C

－－六角头螺栓全螺纹 C级　ISO 4018:1999 | GB /T 5781-2000 | 代替 GB/T 5781-1986
Hexagon head bolts-Full thread-product grade C

－－六角头螺栓　ISO 4014：1999 | GB /T 5782-2000 | 代替 GB/T 5782-1986
Hexagon head bolts

－－六角头螺栓全螺纹　ISO 4017：1999 | GB /T 5783-2000 | 代替 GB/T 5783-1986
Hexagon head bolts-Full thread

－－六角头螺栓-细杆-B级　UDC 621.882.6 | GB 5784-86 | 代替 GB30、21-76
Hexagon head bolts-Reduced shank -Product grade B

－－六角头螺栓细牙　ISO 8765：1999 | GB /T 5785-2000 | 代替 GB/T 5785-1986
Hexagon head bolts with fine pitch thread

－－六角头螺栓细牙全螺纹　ISO 8676：1999 | GB /T 5786-2000 | 代替 GB/T 5786-1986
Hexagon head bolts with fine pitch thread-Full thread

－－六角法兰面螺栓-加大系列-B级　UDC 621.882.6 | GB 5789-86 |
Hexagon flange bolts-Heavy series-product grade B

－－六角法兰面螺栓-加大系列-细杆-B级　UDC 621.882.6 | GB 5790-86 |
Hexagon flange bolts-Heavy series-product grade B

－－六角法兰面螺栓小系列　ISO 4162：1990 | GB /T 16674-1996 | 代替 GB/T 5787、5788-1986
Hexagon flange bolts-Small series

－－钢网架螺栓球节点用高强度螺栓　GB /T 16939-1997 |
High strength bolts for joints of space grid structures

螺柱

－－双头螺柱 bm=1d　UDC 621.882 | GB 897-88 | 代替 GB897-76
Double end studs-bm=1d

－－双头螺柱 bm=1.25d　UDC 621.882 | GB 898-88 | 代替 GB898-76
Double end studs-bm=1.25d

－－双头螺柱 bm=1.5d　UDC 621.882 | GB 899-88 | 代替 GB899-76
Double end studs-bm=1.5d

－－双头螺柱 bm=2d　UDC 621.882 | GB 900-88 | 代替 GB900-76
Double end studs--bm=2d

－－等长双头螺柱 B级　UDC 621.882 | GB 901-88 | 代替 GB901-76
Double end studs(clamping type) -Product grade B

－－手工焊用焊接螺柱　GB 902.1-89 | 代替 GB902-76
Weld studs for manual welding

－－机动弧焊用焊接螺柱　GB 902.2-89 | 代替 GB902-76
Weld studs for arc welding

－－储能焊用焊接螺柱　GB 902.3-89 | 代替 GB902-76
Weld studs for capacitor discharge welding

－－等长双头螺柱 C级　UDC 621.882 | GB 953-88 | 代替 GB953-76
Double end studs(clamping type)-product grade C

－－螺杆　GB /T 15389-94 |
Threaded rods

螺母

－－方螺母 C级　UDC 621.882.3 | GB 39-88 | 代替 GB39-76
Square nuts-product grade C

－－六角螺母 C级　ISO 4034：1999 | GB /T41-2000 | 代替 GB/T 41-1986
Hexagon nuts-product grade C

－－六角厚螺母　ISO 621.882.3 | GB 56-88 | 代替 GB56-76
Hexagon thick nuts

－－蝶形螺母　UDC 621.882.3 | GB 62-88 | 代替 GB62-76
Wing nuts

－－环形螺母　UDC 621.882.3 | GB 63-88 | 代替 GB63-76
Lifting nuts

－－组合式盖形螺母　UDC 621.882.3 | GB 802-88 | 代替 GB802-76
Acorn nuts

－－球面六角螺母　UDC 621.882.3 | GB 804-88 | 代替 GB804-76
Hexagon nuts with raised face

－－扣紧螺母　UDC 621.882.3 | GB 805-88 | 代替 GB805-76
Tight nuts

－－滚花高螺母　UDC 621.882.3 | GB 806-88 | 代替 GB806-76
Knurled nut with collar

－－滚花薄螺母　UDC 621.882.3 | GB 807-88 | 代替 GB807-76
Knurled nuts

－－小六角特扁细牙螺母　UDC 621.882.3 | GB 808-88 | 代替 GB808-76
Small hexagon thin nuts-Fine pitch thread

－－嵌装圆螺母　UDC 621.882.3 | GB 809-88 | 代替 GB809-76
Lnsert round nuts

－－小圆螺母　UDC 621.882.3 | GB 810-88 | 代替 GB810-76
Small round nuts

－－圆螺母　UDC 621.882.3 | GB 812-88 | 代替 GB812-76
Round nuts

－－端面带孔圆螺母　UDC 621.882.3 | GB 815-88 | 代替 GB815-76
Round nuts with drilled holes in one face

－－侧面带孔圆螺母　UDC 621.882.3 | GB 816-88 | 代替 GB816-79
Round nuts with set pin holes in side

－－带槽圆螺母　UDC 621.882.3 | GB 817-88 | 代替 GB817-76
Slotted round nuts

－－1型非金属嵌件六角锁紧螺母　ISO 7040：1997 | GB /T 889.1-2000 | 代替 GB/T 889-1986
Prevailing torque type hexagon nuts(with non-metallic insert),style 1

－－1型非金属嵌件六角锁紧螺母细牙　ISO 10512：1997 | GB /T 889.2-2000 |
Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread

－－盖形螺母　UDC 621.882.3 | GB 923-88 | 代替 GB923-76
Acorn nuts

－－1型六角螺母　ISO 4032：1999 | GB /T 6170-2000 | 代替 GB/T 6170-1986
Hexagon nuts,style 1

－－1型六角螺母细牙　ISO 8673：1999 | GB /T 6171-2000 | 代替 GB/T 6171-1986
Hexagon nuts,style 1,with fine pitch thread

－－六角薄螺母　ISO 4035：1999 | GB /T 6172.1-2000 | 代替 GB/T 6172-1986
Hexagon thin nuts(chamfered)

－－非金属嵌件六角锁紧薄螺母　ISO 10511：1997 | GB /T 6072.2-2000 |
Prevailing torque type hexagon thin nuts(with non-metallic insert)

－－六角薄螺母细牙　ISO 8675：1999 | GB /T 6173-2000 | 代替 GB/T 6173-1986
Hexagon thin nuts(chamfered) with fine pitch thread

－－六角薄螺母无倒角　ISO 4036：1999 | GB /T 6174-2000 | 代替 GB/T 6174-1986
Hexagon thin nuts(unchamfered)

－－2型六角螺母　ISO 4033：1999 | GB /T 6175-2000 | 代替 GB/T 6175-1986
Hexagon nuts,style 2

－－2型六角螺母细牙　ISO 8674：1999 | GB /T 6176-2000 | 代替 GB/T 6176-1986
Hexagon nuts,style 2,with fine pitch thread

－－六角法兰面螺母　ISO 4161：1999 | GB /T 6177.1-2000 | 代替 GB/T 6177-1986
Hexagon nuts with flange

－－六角法兰面螺母细牙　ISO 10663：1999 | GB /T 6177.2-2000 |
Hexagon nuts with flange-fine pitch thread

－－1型六角开槽螺母-A和B级　UDC 621.882.3 | GB 6178-86 | 代替 GB57~58-76
Hexagon slotted and castle nuts,style 1 -product grades A and B

－－1型六角开槽螺母-C级　UDC 621.882.3 | GB 6179-86 | 代替 GB57~58-76
Hexagon slotted nuts,style 1 -product grade C

－－2型六角开槽螺母-A和B级　UDC 621.882.3 | GB 6180-86 |
Hexagon slotted and castle nuts,style 2 -Product grades A and B

－－六角开槽薄螺母-A和B级　UDC 621.882.3 | GB 6181-86 | 代替 GB59~60-76
Hexagon thin slotted nuts-Product grades A and B

－－2型非金属嵌件六角锁紧螺母　ISO 7041：1997 | GB /T 6182-2000 | 代替 GB/T 6182-1986
Prevailing torque type hexagon nuts(with non-metallic insert),style 2

－－非金属嵌件六角法兰面锁紧螺母　ISO 7043：1997 | GB /T 6183.1-2000 | 代替 GB/T 6183-1986
Prevailing torque type hexagon nuts with flange(with non-metallic insert)

－－非金属嵌件六角法兰面锁紧螺母细牙　ISO 12125：1997 | GB /T 6183.2-2000 |
Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread

－－1型全金属六角锁紧螺母　ISO 7719：1997 | GB /T 6184-2000 | 代替 GB/T 6184-1986
Prevailing torque type all-metal hexagon nuts,style 1

－－2型全金属六角锁紧螺母　ISO 7042：1997 | GB /T 6185.1-2000 | 代替 GB/T 6185-1986
Prevailing torque type all-metal hexagon nuts,style 2

－－2型全金属六角锁紧螺母细牙　ISO 10513：1997 | GB /T 6185.2-2000 |
Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread

－－2型全金属六角锁紧螺母 9级　ISO 7720：1997 | GB /T 6186-2000 | 代替 GB/T 6186-1986
Prevailing torque type all-metal hexagon nuts,style 2-Property class 9

－－全金属六角法兰面锁紧螺母　ISO 7044：1997 | GB /T 6187.1-2000 | 代替 GB/T 6187-1986
Prevailing torque type all-metal hexagon nuts with flange

－－全金属六角法兰面锁紧螺母细牙　ISO 12126：1997 | GB /T 6187.2-2000 |
Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread

－－1型六角开槽螺母细牙 A和B级　UDC 621.882.3 | GB 9457-88 | 代替 GB57、58-76
Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B

－－2型六角开槽螺母细牙 A和B级　UDC 621.882.3 | GB 9458-88 |
Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B

－－六角开槽薄螺母细牙 A和B级　UDC 621.882.3 | GB 9459-88 | 代替 GB59、60-76
Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B

－－焊接方螺母　GB /T 13680-92 |
Square weld nuts

－－焊接六角螺母　GB /T 13681-92 |
Hexagon weld nuts

－－平头铆螺母　GB /T 17880.1-1999 |
Flat head riveted nuts

－－沉头铆螺母　GB /T 17880.2-1999 |
Countersunk head riveted nuts

－－小沉头铆螺母　GB /T 17880.3-1999 |
Small countersunk head riveted nuts

－－120°小沉头铆螺母　GB /T 17880.4-1999 |
120°Small countersunk head riveted nuts

－－平头六角铆螺母　GB /T 17880.5-1999 |
Flat head hexagon riveted nuts

－－精密机械用六角螺母　ISO 4166：1979 | GB /T 18195-2000 |
Hexagon nuts for fine mechanics

螺钉

－－开槽圆柱头螺钉　ISO 1207：1992 | GB /T 65-2000 | 代替 GB/T 65-1985
Slotted cheese head screws

－－开槽盘头螺钉　ISO 1580：1994 | GB /T 67-2000 | 代替 GB/T 67-1985
Slotted pan head screws

－－开槽沉头螺钉　ISO 2009：1994 | GB /T 68-2000 | 代替 GB/T 68-1985
Slotted countersunk flat head screws (common head style)

－－开槽半沉头螺钉　ISO 2010：1994 | GB /T 69-2000 | 代替 GB/T 69-1985
Countersunk slotted raised head screws (common head style)

－－内六角圆柱头螺钉　ISO 4762：1997 | GB /T 70.1-2000 | 代替 GB/T 70-1985
Hexagon socket head cap screws

－－内六角平圆头螺钉　ISO 7380：1997 | GB /T 70.2-2000 |
Hexagon socket button head screws

－－内六角沉头螺钉　ISO 10642：1997 | GB /T 70.3-2000 |
Hexagon socket countersunk head screws

－－开槽锥端紧定螺钉　UDC 621.882.219 | GB 71-85 | 代替 GB71-76
Slotted set screws with cone point

－－开槽锥端定位螺钉　UDC 621.882.2 | GB 72-88 | 代替 GB72-76
Slotted setscrews with cone point

－－开槽平端紧定螺钉　UDC 621.882.219.4 | GB 73-85 | 代替 GB73-76
Slotted set screws with flat point

－－开槽凹端紧定螺钉　UDC 621.882.219.4.092.6 | GB 74-85 | 代替 GB74-76
Slotted set screws with cup point

－－开槽长圆柱端紧定螺钉　UDC 621.882.219.4.092.5 | GB 75-85 | 代替 GB75-76
Slotted set screws with long dog point

－－内六角平端紧定螺钉　ISO 4026：1993 | GB /T 77-2000 | 代替 GB/T 77-1985
Hexagon socket set screws with flat point

－－内六角锥端紧定螺钉　ISO 4027：1993 | GB /T 78-2000 | 代替 GB/T 78-1985
Hexagon socket set screws with cone point

－－内六角圆柱端紧定螺钉　ISO 4028：1993 | GB /T 79-2000 | 代替 GB/T 79-1985
Hexagon socket set screws with dog point

－－内六角凹端紧定螺钉　ISO 4029：1993 | GB /T 80-2000 | 代替 GB/T 80-1985
Hexagon socket set screws with cup point

－－方头长圆柱球面端紧定螺钉　UDC 621.882.2 | GB 83-88 | 代替 GB83-76
Square set screws with long dog point and rounded end

－－方头凹端紧定螺钉　UDC 621.882.2 | GB 84-88 | 代替 GB84-76
Square set screws with cup point

－－方头长圆柱端紧定螺钉　UDC 621.882.2 | GB 85-88 | 代替 GB85-76
Square set screws with long dog point

－－方头短圆柱锥端紧定螺钉　UDC 621.882.2 | GB 86-88 | 代替 GB86-76
Square set screws with short dog point and cone end

－－十字槽盘头螺钉　ISO 7045：1994 | GB /T 818-2000 | 代替 GB/T 818-1985
Pan head screws with cross recess

－－十字槽沉头螺钉第1部分：钢4.8级　ISO 7046-1：1994 | GB /T 819.1-2000 | 代替 GB/T 819-1985
Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8

－－十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3　ISO 7046-2：1990 | GB /T 819.2-1997 |
Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals

－－十字槽半沉头螺钉　ISO 7047：1994 | GB /T 820-2000 | 代替 GB/T 820-1985
Countersunk raised head screws (common head style) with cross recess

－－方头平端紧定螺钉　UDC 621.882.2 | GB 821-88 | 代替 GB821-76
Square set screws with chamfered end

－－十字槽圆柱头螺钉　ISO 7048：1998 | GB /T 822-2000 | 代替 GB/T 822-1988
Cheese head screws with cross recess

－－十字槽小盘头螺钉　UDC 621.882.2 | GB 823-88 | 代替 GB823-76
Cross recessed small pan head screws

－－吊环螺钉　UDC 621.882 | GB 825-88 | 代替 GB825-76
Eyebolts

－－开槽盘头定位螺钉　UDC 621.882.2 | GB 828-88 | 代替 GB828-76
Slotted pan head set setscrews with dog point

－－开槽圆柱端定位螺钉　UDC 621.882.2 | GB 829-88 | 代替 GB829-76
Slotted setscrews with dog point

－－开槽圆柱头轴位螺钉　UDC 621.882.2 | GB 830-88 | 代替 GB830-76
Slotted cheese head screws with shoulder

－－开槽无头轴位螺钉　UDC 621.882.2 | GB 831-88 | 代替 GB831-76
Slotted shoulder screws

－－开槽带孔球面圆柱头螺钉　UDC 621.882.2 | GB 832-88 | 代替 GB832-76
Slotted capstan screws

－－开槽大圆柱头螺钉　UDC 621.882.2 | GB 833-88 | 代替 GB833-76
Slotted large cheese head screws

－－滚花高头螺钉　UDC 621.882.2 | GB 834-88 | 代替 GB834-76
Knurled thumb screws

－－滚花平头螺钉　UDC 621.882.2 | GB 835-88 | 代替 GB835-76
Knurled screws

－－滚花小头螺钉　UDC 621.882.2 | GB 836-88 | 代替 GB836-76
Knurled screws with small head

－－开槽盘头不脱出螺钉　UDC 621.882.2 | GB 837-88 | 代替 GB837-76
Slotted pan head screws with waisted shank

－－六角头不脱出螺钉　UDC 621.882.2 | GB 838-88 | 代替 GB838-76
Hexagon screws with waisted shank

－－滚花头不脱出螺钉　UDC 621.882.2 | GB 839-88 | 代替 GB839-76
Knurled thumb screws with waisted shank

－－塑料滚花头螺钉　UDC 621.882.2 | GB 840-88 | 代替 GB840-79
Plastic diamond knurlhead screws

－－开槽球面圆柱头轴位螺钉　UDC 621.882.2 | GB 946-88 | 代替 GB946-76
Slotted raised head with shoulder

－－开槽球面大圆柱头螺钉　UDC 621.882.2 | GB 947-88 | 代替 GB947-76
Slotted large raised cheese head screws

－－开槽沉头不脱出螺钉　UDC 621.882.2 | GB 948-88 | 代替 GB948-76
Slotted countersunk head screws with waisted shank

－－开槽半沉头不脱出螺钉　UDC 621.882.2 | GB 949-88 | 代替 GB949-76
Slotted raised countersunk head screws with waisted shank

－－内六角花形盘头螺钉　UDC 621.882.2 | GB 2672-86 | 代替 GB2672-81
Hexagon lobular socket pan head screws

－－内六角花形沉头螺钉　UDC 621.882.2 | GB 2673-86 | 代替 GB2673-81
Hexagon lobular socket countersunk head screws

－－内六角花形半沉头螺钉　UDC 621.882.2 | GB 2674-86 | 代替 GB2674-81
Hexagon lobular socket raised countersunk head screws

－－内六角圆柱头轴肩螺钉　UDC 621.882.215.6 | GB 5281-85 |
Hexagon socket head shoulder screws

－－内六角花形圆柱头螺钉-4.8级　UDC 621.882.2 | GB 6190-86 | 代替 GB2671-81
Hexagon lobular socket head cap screws-property class 4.8

－－内六角花形圆柱头螺钉-8.8和10.9级　UDC 621.882.2 | GB 6191-86 | 代替 GB2671-81
Hexagon lobular socket head cap screws-property class 8.8 and 10.9

－－精密机械用紧固件十字槽螺钉　GB /T 13806.1-92 |
Fasteners for mechanics-Cross recessed screws

垫圈

－－标准型弹簧垫圈　UDC 621.882.4 | GB 93-87 | 代替 GB93-76
Single coil spring lock washers Normal type

－－平垫圈 C级　ISO 7091：2000 | GB /T 95-2002 | 代替 GB/T 95-1985
Plain washers-Product grade C

－－大垫圈 A级　ISO 7093-1：2000 | GB /T 96.1-2002 | 代替 GB/T 96-1985
Plain washers-Large series-Product grade A

－－大垫圈 C级　ISO 7093-2：2000 | GB /T 96.2-2002 | 代替 GB/T 96-1985
Plain washers-Large series-Product grade C

－－平垫圈 A级　ISO 7089：2000 | GB /T 97.1-2002 | 代替 GB/T 97.1-1985
Plain washers-Product grade A

－－平垫圈倒角型 A级　ISO 7090：2000 | GB /T 97.2-2002 | 代替 GB/T 97.2-1985
Plain washers,chamfered-Product grade A

－－销轴用平垫圈　ISO 8738：1986 | GB /T 97.3-2000 |
Plain washers for clevis pins

－－平垫圈用于螺钉和垫圈组合件　ISO 10673：1998 | GB /T 97.4-2002 | 代替 GB/T 9074.24、9074.25-1988
Plain washers for screw and washer assemblies

－－平垫圈用于自攻螺钉和垫圈组合件　ISO 10669：1999 | GB /T 97.5-2002 | 代替 GB/T 9074.29、9074.30-1988
Plain washers for tapping screw and washer assemblies

－－小垫圈 A级　ISO 7092：2000 | GB /T 848-2002 | 代替 GB/T 848-1985
Plain washers-small series-Product grade A

－－球面垫圈　UDC 621.882.4 | GB 849-88 | 代替 GB849-76
Washers with ball face

－－锥面垫圈　UDC 621.882.4 | GB 850-88 | 代替 GB850-76
Washers with cone face

－－开口垫圈　UDC 621.882.4 | GB 851-88 | 代替 GB851-76
Washers with split

－－工字钢用方斜垫圈　UDC 621.882.4 | GB 852-88 | 代替 GB852-76
Square taper washers for I section

－－槽钢用方斜垫圈　UDC 621.882.4 | GB 853-88 | 代替 GB853-76
Square taper washers for slot section

－－单耳止动垫圈　UDC 621.882.4 | GB 854-88 | 代替 GB854-76
Tab washers with long tab

－－双耳止动垫圈　UDC 621.882.4 | GB 855-88 | 代替 GB855-76
Tab washers with long tab and wing

－－外舌止动垫圈　UDC 621.882.4 | GB 856-88 | 代替 GB856-76
External tab washers

－－圆螺母用止动垫圈　UDC 621.882.4 | GB 858-88 | 代替 GB858-76
Tab washers for round nut

－－轻型弹簧垫圈　UDC 621.882.4 | GB 859-87 | 代替 GB859-76
Single coil spring lock washers,Light type

－－鞍形弹性垫圈　UDC 621.882.4 | GB 860-87 | 代替 GB860-76
Curved spring washers

－－内齿锁紧垫圈　UDC 621.882.4 | GB 861.1-87 | 代替 GB861-76
Lock washers internal teeth

－－内锯齿锁紧垫圈　UDC 621.882.4 | GB 861.2-87 |
Serrated lock washers internal teeth

－－外齿锁紧垫圈　UDC 621.882.4 | GB 862.1-87 | 代替 GB862-76
Lock washers external teeth

－－外锯齿锁紧垫圈　UDC 621.882.4 | GB 862.2-87 |
Serrated lock washers external teeth

－－波形弹性垫圈　UDC 621.882.4 | GB 955-87 | 代替 GB955-76
Wave spring washers

－－锥形锁紧垫圈　UDC 621.882.4 | GB 956.1-87 | 代替 GB956-76
Countersunk external toothed lock washers

－－锥形锯齿锁紧垫圈　UDC 621.882.4 | GB 956.2-87 |
Countersunk Serrated external toothed lock washers

－－特大垫圈 C级　ISO 7094：2000 | GB /T 5287-2002 | 代替 GB/T 5287-1985
Plain washers-Extra large series-Product grade C

－－重型弹簧垫圈　UDC 621.882.4 | GB 7244-87 |
Single coil spring lock washers,heavy type

－－鞍形弹簧垫圈　UDC 621.882.4 | GB 7245-87 |
Curved Single coil spring lock washers

－－波形弹簧垫圈　UDC 621.882.4 | GB 7246-87 |
Wave Single coil spring lock washers

木螺钉

－－开槽圆头木螺钉　UDC 621.882.2 | GB 99-86 | 代替 GB99-76
Slotted round head wood screws

－－开槽沉头木螺钉　UDC 621.882.2 | GB 100-86 | 代替 GB100-76
Slotted countersunk head wood screws

－－开槽半沉头木螺钉　UDC 621.882.2 | GB 101-86 | 代替 GB101-76
Slotted raised countersunk head wood screws

－－六角头木螺钉　UDC 621.882.2 | GB 102-86 | 代替 GB102-76
Hexagon head wood screws

－－十字槽圆头木螺钉　UDC 621.882.2 | GB 950-86 | 代替 GB950-76
Cross recessed round head wood screws

－－十字槽沉头木螺钉　UDC 621.882.2 | GB 951-86 | 代替 GB951-76
Cross recessed countersunk head wood screws

－－十字槽半沉头木螺钉　UDC 621.882.2 | GB 952-86 | 代替 GB952-76
Cross recessed raised head countersunk head wood screws

自攻螺钉

－－十字槽盘头自攻螺钉　UDC 621.882.216.5.082.8 | GB 845-85 | 代替 GB845-76
Cross recessed pan head tapping screws

－－十字槽沉头自攻螺钉　UDC 621.882.216.5.082.8 | GB 846-85 | 代替 GB846-76
Cross recessed countersunk head tapping screws

－－十字槽半沉头自攻螺钉　UDC 621.882.216.5.082.8 | GB 847-85 | 代替 GB847-76
Cross recessed raised countersunk head tapping screws

－－开槽盘头自攻螺钉　UDC 621.882.215.082.8 | GB 5282-85 |
Slotted pan head tapping screws

－－开槽沉头自攻螺钉　UDC 621.882.215.082.8 | GB 5283-85 |
Slotted countersunkhead tapping screws

－－开槽半沉头自攻螺钉　UDC 621.882.215.082.8 | GB 5284-85 |
Slotted raised countersunkhead tapping screws

－－六角头自攻螺钉　UDC 621.882.215.082.8 | GB 5285-85 |
Hexagon head tapping screws

－－十字槽盘头自攻锁紧螺钉　UDC 621.882 | GB 6560-86 |
Cross recessed pan head thread forming screws

－－十字槽沉头自攻锁紧螺钉　UDC 621.882 | GB 6561-86 |
Cross recessed countersunk head thread forming screws

－－十字槽半沉头自攻锁紧螺钉　UDC 621.882 | GB 6562-86 |
Cross recessed raised countersunk head thread forming screws

－－六角头自攻锁紧螺钉　UDC 621.882 | GB 6563-86 |
Hexagon head thread forming screws

－－内六角花形圆柱头自攻锁紧螺钉　UDC 621.882 | GB 6564-86 |
Hexagon lobular socket thread forming screws

－－十字槽头凹穴六角头自攻螺钉　UDC 621.882.2 | GB 9456-88 |
Cross recessed hexagon head tapping screws with indentation

－－精密机械用紧固件十字槽自攻螺钉刮削端　GB /T 13806.2-92 |
Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point

－－墙板自攻螺钉　GB /T 14210-93 |
Dry wall screws

－－十字槽盘头自钻自攻螺钉　ISO 15481:1999 | GB /T 15856.1-2002 | 代替 GB/T 15856.1-1995
Cross recessed pan head drilling screws with tapping screw thread

－－十字槽沉头自钻自攻螺钉　ISO 15482:1999 | GB /T 15856.2-2002 | 代替 GB/T 15856.2-1995
Cross recessed countersunk head drilling screws with tapping screw thread

－－十字槽半沉头自钻自攻螺钉　ISO 15483:1999 | GB /T 15856.3-2002 | 代替 GB/T 15856.3-1995
Cross recessed raised countersunk head drilling screws with tapping screw thread

－－六角法兰面自钻自攻螺钉　GB /T 15856.4-2002 | 代替 GB/T 15856.4-1995
Hexagon flange drilling screws with tapping screw thread

－－六角凸缘自钻自攻螺钉　ISO 15480:1999 | GB /T 15856.5-2002 |
Hexagon washer head drilling screws with tapping screw thread

－－六角凸缘自攻螺钉　ISO 7053:1992 | GB /T 16824.1-1997 |
Hexzgon head tapping screws with collar

－－六角法兰面自攻螺钉　ISO 10509:1992 | GB /T 16824.2-1997 |
Hexagon flange head tapping screws

销

－－开口销　ISO 1234:1997 | GB /T 91-2000 | 代替 GB/T 91-1986
Split pins

－－圆锥销　ISO 2339:1986 | GB /T 117-2000 | 代替 GB/T 117-1996
Taper pins

－－内螺纹圆锥销　ISO 8736:1986 | GB /T 118-2000 | 代替 GB?T 118-1996
Taper pins with internal thread

－－圆柱销不淬硬钢和奥氏体不锈钢　ISO 2338:1997 | GB /T 119.1-2000 | 代替 GB/T 119-1986
Parallel pins,of unhardened steel and austenitic stainless steel

－－圆柱销淬硬钢和马氏体不锈钢　ISO 8734:1997 | GB /T 119.2-2000 | 代替 GB/T 119-1986
Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)

－－内螺纹圆柱销不淬硬钢和奥氏体不锈钢　ISO 8733:1997 | GB /T 120.1-2000 | 代替 GB/T 120-1986
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel

－－内螺纹圆柱销淬硬钢和马氏体不锈钢　ISO 8735:1997 | GB /T 120.2-2000 | 代替 GB/T 120-1986
Parallel pins with internal thread,of hardened steel and martensitic stainless steel

－－开尾圆锥销　UDC 621.886 | GB 877-76 | 代替 GB877-76
Taper pins with split

－－螺纹圆柱销　UDC 621.886 | GB 878-86 | 代替 GB878-76
Parallel pins with external thread

－－弹性圆柱销直槽重型　ISO 8752:1997 | GB /T 879.1-2000 | 代替 GB/T 879-1986
Spring-type straight pins-Slotted, heavy duty

－－弹性圆柱销直槽轻型　ISO 13337:1997 | GB /T 879.2-2000 |
Spring-type straight pins-Slotted,light duty

－－弹性圆柱销卷制重型　ISO 8748:1997 | GB /T 879.3-2000 |
Spring-type straight pins-Coiled,heavy duty

－－弹性圆柱销卷制标准型　ISO 8750:1997 | GB /T 879.4-2000 |
Spring-type straight pins-Coiled,standard duty

－－弹性圆柱销卷制轻型　ISO 8751:1997 | GB /T 879.5-2000 |
Spring-type straight pins-Coiled,light duty

－－带孔销　UDC 621.886 | GB 880-86 | 代替 GB880-76
Pins with split pin hole

－－螺尾锥销　ISO 8737:1986 | GB /T 881-2000 | 代替 GB/T 881-1986
Taper pins with external thread

－－销轴　UDC 621.886 | GB 882-86 | 代替 GB882-76
Clevis pins with head

－－槽销平行沟槽　GB /T 13829.1-92 |
Crooved pins-Parallel grooved

－－槽销锥销　GB /T 13829.2-92 |
Crooved pins-taper grooved

－－槽销圆头沉头　GB /T 13829.3-92 |
Grooved pins-with round head or countersunk head

铆钉

－－平头铆钉　UDC 621.884 | GB 109-86 | 代替 GB109-76
Flat head rivets

－－标牌铆钉　UDC 621.884 | GB 827-86 | 代替 GB827-76
Rivets for name plate

－－半圆头铆钉(粗制)　UDC 621.884 | GB 863.1-86 | 代替 GB863-76
Round head rivets-Black

－－小半圆头铆钉(粗制)　UDC 621.884 | GB 863.2-86 |
Round head rivets with small head-Black

－－平锥头铆钉(粗制)　UDC 621.884 | GB 864-86 | 代替 GB864-76
Cone head rivets-Black

－－沉头铆钉(粗制)　UDC 621.884 | GB 865-86 | 代替 GB865-86
Countersunk head rivets-Black

－－半沉头铆钉(粗制)　UDC 621.884 | GB 866-86 | 代替 GB866-76
Oval countersunk head rivets-Black

－－半圆头铆钉　UDC 621.884 | GB 867-86 | 代替 GB867-76
Round head rivets

－－平锥头铆钉　UDC 621.884 | GB 868-86 | 代替 GB868-76
Cone head rivets

－－沉头铆钉　UDC 621.884 | GB 869-86 | 代替 GB869-76
Countersunk head rivets

－－半沉头铆钉　UDC 621.884 | GB 870-86 | 代替 GB870-76
Oval countersunk head rivets

－－扁圆头铆钉　UDC 621.884 | GB 871-86 | 代替 GB871-76
Flat round head rivets

－－扁平头铆钉　UDC 621.884 | GB 872-86 | 代替 GB872-76
Thin head rivets

－－扁圆头半空心铆钉　UDC 621.884 | GB 873-86 | 代替 GB873-76
Oval head semi-tubular rivets

－－120°沉头半空心铆钉　UDC 621.884 | GB 874-86 | 代替 GB874-76
120 degree countersunk head semi-tubular rivets

－－扁平头半空心铆钉　UDC 621.884 | GB 875-86 | 代替 GB875-76
Thin head semi-tubular rivets

－－空心铆钉　UDC 621.884 | GB 876-86 | 代替 GB876-76
Tubular rivets

－－120°沉头铆钉　UDC 621.884 | GB 954-86 | 代替 GB954-76
120 degree countersunk head rivets

－－管状铆钉　UDC 621.884 | GB 975-86 | 代替 GB975-76
Pipe type rivets

－－大扁圆头铆钉　UDC 621.884 | GB 1011-86 | 代替 GB1011-76
Truss head rivets

－－120°半沉头铆钉　UDC 621.884 | GB 1012-86 | 代替 GB1012-76
120 degree oval countersunk rivets

－－平锥头半空心铆钉　UDC 621.884 | GB 1013-86 | 代替 GB1013-76
Cone head semi-tubler rivets

－－大扁圆头半空心铆钉　UDC 621.884 | GB 1014-86 | 代替 GB1014-76
Truss head semi-tublar rivets

－－沉头半空心铆钉　UDC 621.884 | GB 1015-86 | 代替 GB1015-76
Countersunk head semi-tublar rivets

－－无头铆钉　UDC 621.884 | GB 1016-86 | 代替 GB1016-76
Headless rivets

－－封闭型扁圆头抽芯铆钉　GB 12615-90 |
Mushroom head break mandrel closed end blind rivets

－－封闭型沉头抽芯铆钉　GB 12616-90 |
120 deg flush head break mandrel closed end blind rivets

－－开口型沉头抽芯铆钉　GB 12617-90 |
120 deg flush head break mandrel blind rivets

－－开口型扁圆头抽芯铆钉　GB 12618-90 |
Mushroom head break mandrel blind rivets

－－扁圆头击芯铆钉　GB /T 15855.1-1995 |
Flat round head drive rivets

－－沉头击芯铆钉　GB /T 15855.2-1995 |
Countersunk head drive rivets

挡圈

－－锥销锁紧挡圈　UDC 621.885 | GB 883-86 | 代替 GB883-76
Lock rings with cone pin

－－螺钉锁紧挡圈　UDC 621.885 | GB 884-86 | 代替 GB884-76
Lock ring with screw

－－带锁圈的螺钉锁紧挡圈　UDC 621.885 | GB 885-86 | 代替 GB885-76
Lock rings with screw and circlip

－－轴肩挡圈　UDC 621.885 | GB 886-86 | 代替 GB886-76
Rings for shoulder

－－螺钉紧固轴端挡圈　UDC 621.885 | GB 891-86 | 代替 GB891-76
Lock rings at the end of shaft with screw

－－螺栓紧固轴端挡圈　UDC 621.885 | GB 892-86 | 代替 GB892-76
Lock rings at the end of shaft with bolt

－－孔用弹性挡圈-A型　UDC 621.885 | GB 893.1-86 | 代替 GB893-76
Circlips for holes-type A

－－孔用弹性挡圈-B型　UDC 621.885 | GB 893.2-86 |
Circlips for hole-type B

－－轴用弹性挡圈-A型　UDC 621.885 | GB 894.1-86 | 代替 GB894-76
Circlips for shaft-type A

－－轴用弹性挡圈-B型　UDC 621.885 | GB 894.2-86 |
Circlips for shaft-type B

－－孔用钢丝挡圈　UDC 621.885 | GB 895.1-86 | 代替 GB895-76
Roundwire snap rings for hole

－－轴用钢丝挡圈　UDC 621.885 | GB 895.2-86 | 代替 GB895-76
Roundwire snap rings for shaft

－－开口挡圈　UDC 621.885 | GB 896-86 | 代替 GB896-76
“E”rings

－－钢丝锁圈　UDC 621.885 | GB 921-86 | 代替 GB921-76
Round wire circlips

－－夹紧挡圈　UDC 621.885 | GB 960-86 | 代替 GB960-76
Grip rings

紧固件-组合件和连接副

－－钢结构用高强度大六角头螺栓　GB /T 1228-91 | 代替 GB1228-84
High strength bolts with large hexagon head for steel structures

－－钢结构用高强度大六角头螺母　GB /T 1229-91 | 代替 GB1229-84
High strength large hexagon nuts for steel structures

－－钢结构用高强度垫圈　GB /T 1230-91 | 代替 GB1230-84
High strength plain washers for steel structures

－－钢结构用扭剪型高强度螺栓连接副　GB /T 3632-1995 | 代替 GB3632-83
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures

－－螺栓或螺钉和平垫圈组合件　ISO 10644：1998 | GB /T 9074.1-2002 | 代替 GB/T 9074.1、9074.14-1988
Bolt or screw and washer assemblies with plain washers

－－十字槽头螺钉和外锯齿锁紧垫圈组合件　UDC 621.882 | GB 9074.2-88 |
Cross recessed pan head screw and serrated lock washer external teeth assemblies

－－十字槽盘头螺钉和弹簧垫圈组合件　UDC 621.882 | GB 9074.3-88 |
Cross recessed pan head screw and single coll spring lock washer assemblies

－－十字槽盘头螺钉、弹簧垫圈和平垫圈组合件　UDC 621.882 | GB 9074.4-88 |
Cross recessed pan head screw, single coil spring lock washer assemblies

－－十字槽小盘头螺钉和平垫圈组合件　UDC 621.882 | GB 9074.5-88 |
Cross recessed small pan head screw and small plain washer assemblies

－－十字槽小盘头螺钉和大垫圈组合件　UDC 621.882 | GB 9074.6-88 |
Cross recessed small pan head screw and big plain washer assemblies

－－十字槽小盘头螺钉和弹簧垫圈组合件　UDC 621.882 | GB 9074.7-88 |
Cross recessed small pan head screw and single coil spring lock washer assemblies

－－十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件　UDC 621.882 | GB 9074.8-88 |
Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies

－－十字槽沉头螺钉和锥形锁紧垫圈组合件　UDC 621.882 | GB 9074.9-88 |
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies

－－十字槽半沉头螺钉和锥形锁紧垫圈组合件　UDC 621.882 | GB 9074.10-88 |
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies

－－十字槽凹穴六角头螺栓和平垫圈组合件　UDC 621.882 | GB 9074.11-88 |
Cross recessed hexagon bolt with indentation and plain washer assemblies

－－十字槽凹穴六角头螺栓和弹簧垫圈组合件　UDC 621.882 | GB 9074.12-88 |
Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies

－－十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件　UDC 621.882 | GB 9074.13-88 |
Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies

－－六角头螺栓和弹簧垫圈组合件　UDC 621.882 | GB 9074.15-88 |
Hexagon head bolt and single coil spring lock washer assemblies

－－六角头螺栓和外锯齿锁紧垫圈组合件　UDC 621.882 | GB 9074.16-88 |
Hexagon head bolt and serrated lock washer external teeth assemblies

－－六角头螺栓、弹簧垫圈和平垫圈组合件　UDC 621.882 | GB 9074.17-88 |
Hexagon head bolt,single coil spring lock washer and plain washer assemblies

－－自攻螺钉和平垫圈组合件　ISO 10510：1999 | GB /T 9074.18-2002 | 代替 GB/T 9074.18、9074.19、9074、22、9074、23-1988
Tapping screw and washer assemblies with plain washers

－－十字槽凹穴六角头自攻螺钉和平垫圈组合件　UDC 621.882 | GB 9074.20-88 |
Cross recessed hexagon head tapping screw with indentation and plain washer assemblies

－－十字槽凹穴六角头自攻螺钉和大垫圈组合件　UDC 621.882 | GB 9074.21-88 |
Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies

－－组合件用弹簧垫圈　UDC 621.882 | GB 9074.26-88 |
Single coil spring lock washer for assembly

－－组合件用外锯齿锁紧垫圈　UDC 621.882 | GB 9074.27-88 |
Serrated lock washer external teeth for assembly

－－组合件用锥形锁紧垫圈　UDC 621.882 | GB 9074.28-88 |
Lountersunk external toothed lock washer for assembly

－－腰状杆螺柱连接副型式分类　GB /T 13807.1-92 |
Connections with waisted stud-Tape classification

－－腰状杆螺柱连接副螺柱　GB /T 13087.2-92 |
Connections with waisted stud-Studs

－－腰状杆螺柱连接副螺母、受力套管　GB /T 13087.3-92 |
Connections with waisted stud-Nuts,extension sleeves

－－栓接结构用大六角头螺栓螺纹长度按GB/T 3106 C级 8.8和10.9级　ISO 7411：1984 | GB /T 18230.1-2000 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9

－－栓接结构用大六角头螺栓短螺纹长度 C级 8.8和 10.9级　ISO 7412：1984 | GB /T 18230.2-2000 |
Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9

－－栓接结构用大六角头螺母 B级 8和10级　ISO 4775：1984 | GB /T 18230.3-2000 |
Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10

－－栓接结构用1型大六角螺母 B级 10级　ISO 7414：1984 | GB /T 18230.4-2000 |
Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10

－－栓接结构用平垫圈淬火并回火　ISO 7416：1984 | GB /T 18230.5-2000 |
Plain washers for high-strength structural bolting hardened and tempered

－－栓接结构用1型大六角螺母浸热镀锌(加大攻丝尺寸) A和B级 5.6和8级　ISO 7413：1984 | GB /T 18230.6-2000 |
Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8

－－栓接结构用2型大六角螺母浸热镀锌(加大攻丝尺寸) A级 9级　ISO 7417:1984 | GB /T 18230.7-2000 |
Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9

焊钉

－－无头焊钉　GB 10432-89 |
Headless studs for stud welding

－－电弧螺柱焊用圆柱头焊钉　GB /T 10433-2002 | 代替 GB/T 10433-1989
Cheese head studs for arc stud welding

非标（螺栓）

－－螺栓→双头螺栓　GB 非标 |

－－螺栓→不锈钢，碳钢，铜，铝非标准件　GB 非标 |

－－螺栓→塑料螺丝非标　GB 非标 |

－－螺栓→外六角不锈钢螺栓　GB 非标 |

－－螺栓→内六角螺栓　GB 非标 |